Perun Two Horn Anvils

For centuries, anvils have been one of the basic and the most important blacksmith's tools. Over the years, their shape and treatment have changed, as well as the material from which they were produced.Knowledge and experience of the best Polish and foreign blacksmiths helped us to create our steel anvils, which characterize by ideal proportions, unique shape and excellent technical parameters.Perun anvils are manufactured entirely from specially-chosen alloy steel. Perun anvils are made of a specially steel alloy developed by Perun. Such blacksmith shop tools contain elements such as C, Mn, Mo, Si, Cr.We do not weld the face and the leg of the anvil together. Instead, we cast the whole anvil. Every casting is always checked for possible casting defects such as cracks, shrink cavities, etc. After passing quality control, our castings are heat treated and precisely machined. The face of the steel anvil is hardened by quenching, and its edges are tempered so that it does not crumble at work. After heat treatment the working surface is also ground. Call for shipping charges on sizes over 150 lb. Finish on curved working surfaces of Anvils (Horns) MAY require final finishing and polishing by Master Blacksmith if desired. 1" = 25.4mm